You're one in a Million

This card is an anniversary card for that wonderful man I married 24 years ago! It's hard to believe it's been that long!

For this card I used masking techniques.   

I started out with a penguin stamp, (he LOVES penguins)  and immediately stamped two images onto masking paper, then fussy cut them out.   I use post-it-notes for the masking paper.  I found some with almost full adhesive on the back.  It seems to hold up the best for multiple applications.  

Starting on the bottom row,  I stamped my penguins.  On the second row is when I needed the masks.  I would place both masks, and stamp the penguin between the masks.  I repeated this all the way up.  

I colored these little cuties with alcohol markers.  The tummies were done with ink daubers.  I did one a different color to make him stand out, then I added a bow tie and hat to make him stand out even more.   The eyes are darkened with glossy accents.

After coloring all the penguins, I fussy cut the top of the page,  and the bottom of the page,  and mounted that to fun foam.  I  added a 4" x 5 1/4" piece of pattern paper to a card base,  then mounted the penguin panel to that.  

The sentiment is computer generated and popped up with fun foam.

Onto the inside...

The inside has pattern paper added to the base card, and the the Katherine Label Pop-up (by Karen Burniston) was used.  I added two penguins, one is popped up, one is adhered directly to the card.  A few hearts, and an area to sign the card.  

The sentiment on the label is also computer generated.  I mounted that onto some card stock that matched the front paper. 

This was a fun card to make!  Come on!  Penguins!  Who doesn't like penguins?! 

Materials used:

Karen Burnistons' # 1011 Katherine Label Pop-up 
Karen Burniston Props 1
Simon Says Stamp Wild Cuddly Critters

Circle Charm Pop-up

This is my first time using this particular die set, so I've kept it pretty basic.  I need to build the sets, at least once,  before I can figure out different ways to use them.  After designing this particular card, I've learned enough to possibly use it in different ways.  

Let me start off by saying I had laid out all my pattern papers, and card stock before I had started this card.  Not being used to this style of card, I later had to make adjustments.

I fell in love with this sweet floral print!  It was slightly retro in feel and I knew it would be perfect for my Niece's birthday card!

This style of card actually builds best if you do the inside first, but keep in mind, what ever you put on the first circle will be on the front of the card.

It starts with a 4 1/4" x 5 1/4" card base.  I used pattern paper for the front and insides cut slightly smaller as to show a border.  I only adhered the pattern paper around the edges on the front, and inside left panel.  BEFORE DIE CUTTING!

This was so I could remove the paper off the circle portion of the card after I die cut the pop-up.  I added the decorative circle frames BEFORE I adhered the circles together.  

The butterflies are cut from glittery fun foam.  I cut one black, one green, and two from black card stock.  I cut the butterflies apart, then I paper-pieced them back together using all fun foam on the front one.  

The center butterfly is made up of card stock with a fun foam center.  I sandwiched the two black card stock butterflies with a clear acetate strip between them so I could suspend the "charm" in the second circle.

Note: if you use this product, do not run the entire sheet thru the BigShot.  It is self adhesive on the back, and it distorted the rest of the sheet after passing thru the BigShot.   I'd recommend cutting off a piece, slightly larger than the die you are using, that way the rest of the sheet is still left in good order.  

The sentiment is stamped with distress oxide ink then heat embossed with clear embossing powder.  

After getting the card all assembled, I loved the inside.  The outside?  Different story!  The pattern paper didn't really look like it matched anymore!  UGH!  I know we've all experienced this before!   I didn't have enough paper left over to re-cover it!  I decided to try putting a sentiment on the front using a bit of the pattern paper form the inside.  

That only kind of worked.  So then I fussy cut the flowers from some scrap of the inside paper, and glued them on.  Whew!  I'm glad it worked!  I did not have enough metallic silver left to re-do the front either!  

Another Note:  As I mentioned, I was running short on the silver paper, and after building the inside, didn't have enough left to cut a circle frame for the front.....Yes, poor planning!  So instead, I used the braided circle from the Snowman Twist Circle pop up.  I was able to "piece together" the circle edging, and you can't even tell! 

I love how interactive these die sets from Karen Burniston are!  They all play well together.  If you only invested in these sets alone,  you would have enough dies to make almost anything!  Especially if you mix in stamps for different themes!

Hope you all learned something from all my boo boos!  I know I did!

Happy Crafting!

ttfn: Karen

Organizing Die Sets

Sorry I've been AWOL the last couple of days....

...I decided to organize all my dies.  I did not realize what a huge undertaking this would be!  I've lost three full days of my life doing this!  I must say though....It was really worth it!!

Have you ever gone looking for something only to finally find what you are looking for at the end of the pile, or worse yet, going thru it twice cuz you missed it the first time?  Can we say....

Time waster!  Frustrating!  Daunting if you have a lot of dies!  

Well, no more!  I came up with an idea a while back to put my dies into 3 ring mini binders.  I wanted to try it for a while before committing to it to see if it would work.  

So I made a few binders with only some of my dies and tried it for a month.  It dramatically cut down on my time searching for dies.  It worked so good, that I decided to tackle the rest of my collection.    

I found the perfect (for me) binder by "Pen + Gear".  Its a good size.  Not too big so as to be heavy when loaded, but not too small as not to hold enough dies!   They also make the clear protector shields to fit these binders.  

Hopefully this all makes sense.  I started with  a 5 1/2" x 8 1/2" piece of card stock scored at 1" from the bottom.  To the front I glued the cover of the die package.  If that wasn't available, I used an actual die cut out.  This was so that from either side of the page, I could see which die set was in the sleeve.

To the back side of the card stock I glued a magnet sheet large enough to hold the dies.  I folded at the score line towards the back of the page.  This will catch a die in case it slips off the magnet. 

I then put this into the protective sleeve.  I found out (the hard way), the pages could/would slip out of the rings sometimes, so I used ring protectors on the holes.  This stopped that problem.  

I made my own tab sheets to divide the books into categories.  You can purchase them if you don't want to make them. 

Each book has different themes.  For example...

One book holds only pop-up die sets.  This particular book has a table of contents page, and 5 tab pages.  The tab pages are labeled A-E and I used them to sub-divide, to ease looking for certain sets.  On the table of contents page, I can then list which dies are in certain tab sections.  

Another book contains circles, squares, rectangles, etc.  This book just has tabs separating the different types of dies. 

Yet another book is divided by months for holidays.  

Basically you can divide and sub divide however works best for you.  

Here they are, all lined up on a shelf...  Notice how I have a removable label on the spines.  This allows for change as your collection expands.  

I even dedicated a book to all the components, and templates to make more sleeves.  

I must say....I had WAY more dies than I had at first realized, and this project took longer than expected,  BUT...I am so glad that I took the time to do this!

I found most of the supplies at Walmart:  

  Pen + Gear 1"Mini binders

  Pen + Gear Mini sheet protectors

  3 ring hole reinforcements

I found these items at Staples:

  Heavy weight card stock (for tabs and sheets.)

  Post it Note removable label tape

Happy crafting everyone!

ttfn: Karen

Woodland Wonderland

This was a FUN project! As I lay in bed this morning, I kept seeing little fairy woodland type houses in my head!  Well, we all know what that means!  Get out of bed and make a card!  YeeHaw!  I love it when my day start out like this!

I kept the front very simple.  It's a 4 1/4" x 5 1/2" card base.  To this I glued some pattern paper leaving a small border around the edge.  I did a sentiment using an old stamp and the banner die from the Ups Daisy Pop-up set.  I mounted this on a piece of card stock the same color as the base of the card.  I then made this dimensional by mounting it with fun foam.  

 Let's start with these babies!  As you can probably tell, these started out as parts of the castle pop up set.  See the drawbridge?!  First, I die cut the castle piece.  I cut it into 2 sections making use of the two turrets.  

I then ran them thru a wood grained embossing folder.  I distressed them with ink, glued some yellow behind the windows, and attached the doors.  

Then I cut out another castle to use as a backer piece for the houses and glued it to the back of the houses. 

Next, I cut out flowers from the ups daisy set (the smaller one).  I inked the edges, then cut them in half.  I used these pieces for the shingles on the roofs.  I layered them up starting at the bottom of the roof and working upwards.   

I hand cut a chimney for each house, and glued it to the back.  The mushrooms were random pieces of waste from die cuts.  I inked red on the top, brown on the bottoms, added some white dots, and Voila'....Mushrooms!

I added an additional flower to the right side of the blue house, and once again, using the waste from die cuts, I made a center for the flower.  

 I used random papers for the background and lower portion of the card and glued these to the card base.  I then added the floating floor from the house and fence pop up set.  

I added the houses to the various pop-up mechanism and added the stone walkways from the house and fence set.
  
The tree in the background was from the halloween scene die set.  To that I glued leaves made from the leaf die from the flower pot  set.  

The raccoon is from the woodland animals set.  The lantern and the hat on the raccoon are from the camping charms set.  The fence/wall pieces are from the castle pop up set.  The ferns on the wall sections are from a Martha Stewart leaf punch. 

All the papers for the leaves & flowers were made using distress inks, and water.  

The sun flower is from the ups daisy pop up set.

 The flourishes on the floor of the card are from the square spinner pop up set.  I used them to partially frame the area where I will sign the card.  

 So in this card I used mostly Karen Burniston dies.  I used:

1001 Woodland Animals
1049 Camping Charms
1033 Castle Pop-up
1014 Halloween Scene
1015 House and fence Pop-up
1042 Spinner Square Pop-up
1010 Flower Pot Pop-up
1047 Ups Daisy Pop-up

I also used A fern leaf punch from Martha Stewart.  

This card was a BLAST to make!  I needed this boost after finding out I didn't make the cut for the design team member position I was going after.  There is no better way to raise your spirits, than to make a card.  At least not for me! 

Happy crafting!

ttfn: Karen